HOT MELT COATING MACHINE for label stock: The use of hot melt as a bonding adhesive in the industry has been transformed over the past few years and is gradually replacing conventional solvent or water-based systems. Considering the prices of fuel in India, the drying expenses for the water based labels is very high when compared to the hot melt adhesive labels. Hot melt adhesives are more tacky and can withstand the moisture and freezer temperature. Trasy Enterprises is one of the leading designers and builder of a wide range of Hot Melt Coating machines. The best method to coat hot melt for labels is through a slot die coating. Advantages of this process are minimum heat loss compared to the other processes. The molten adhesive is never open to air. (Safety factor) Can coat on almost all materials like BOPP, PET, Cloth, HDPE fabric, Felt, Paper, Nonwoven, Aluminium foil, etc. The coating range in method can be 15 gsm to 600 gsm depending upon requirement. A proper Die and Back up roll setting gives even coating along the width. Also the Proper sync with glue pump and substrate speed and constant melting flow of adhesive, gives even coating along the length. High coating speeds or heavier GSMs can be achieved with the high capacity Melting units. This is to ensure the uninterrupted melt flow while coating. Our Model ‘HMC20’ ensures all these specialities: https://youtu.be/vDIHefwW0zA